Diluant TH730

Introduction of the TH730 thinner in C248 HS Clear Coat.

We launched the C248 HS Clear  Coat some months ago and are very satisfied about the performance. It is well accepted in the market and the results are good and hopeful. A normal step during the introduction is to monitor the quality. Such as spray ability, drying, gloss, mechanical resistance etc.

The result was that we need in some situation besides the TA910 a thinner with a  slower flash-off. For that reason we  introduce the TH730 HS thinner very slow.

The advantages are: 

It gives good results on horizontal parts
TH730 is ideal for larger areas even with fast hardener
It will have an excellent flow.
It will give a better absorption of overspray.
A must to use in circumstances with higher temperatures.
The drying and curing is still comparable with the TA910 thinner 
TH730 thinner can also be used in the HS Surfacer PF131  sanding version  
 
With the introduction of the TH730 thinner in the C248 HS Clear Coat, we are covering the needs of the specific situations  and applications in the market .

The technical data sheets are available on internet, page technical information,and in the next COINS version.